Behringer RD-8: build a kit
18 drum sounds this box makes on its own, in the order to build them.
Record each hit with the sampler, recorder, or DAW you use.
This block draws on the RHYTHM DESIGNER RD-8 User Manual, pp.9-26; its values are starting points.
1KICK 1Short 808 kick with the top left on it
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TUNING40% travel(0…100 % travel)
CCW for low sounds, CW to raise the pitch (p.9)
- TONE64% travel(0…100 % travel)
CCW removes high frequency information (p.9)
- DECAY30% travel(0…100 % travel)
How long the drum rings; CW for longer (p.9)
- LEVEL80% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as KICK 1.
- SWING PREFERENCEPatternpattern-wide
2KICK 2Long kick pushed through the Wave Designer and into the filter
Routing — Send the bass drum to the FX bus: press SEND, use SELECT to light BASS DRUM, press SEND again (p.12)
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TUNING32% travel(0…100 % travel)
- TONE46% travel(0…100 % travel)
Back off the top so the filter has something to bite on
- DECAY78% travel(0…100 % travel)
CW for longer tones (p.9)
- LEVEL82% travel(0…100 % travel)
Level against the other voices (p.9)
- FILTEROnpattern-wide
The ON button engages the filter into the circuit (p.5)
- FILTER MODELPFpattern-wide
The HPF button toggles it; LPF is the default (p.5)
- CUTOFF1800Hz(10…15000 Hz)pattern-wide
One filter for the whole box — every voice on the FX bus shares it (p.13)
Press SEND, SELECT the voice, SEND again
- RESONANCE6(0…10)pattern-wide
A peak at the cutoff point (p.13)
- WAVE DESIGNER ATTACK9dB(-15…15 dB)pattern-wide
0 dB is 12 o’clock and is bypass (p.12)
- WAVE DESIGNER SUSTAIN6dB(-24…24 dB)pattern-wide
Acts like a compressor upward, and shortens the tail downward (p.12)
Record one hit with your recorder as KICK 2.
- SWING PREFERENCEPatternpattern-wide
3SNARE 1Snare with the snares wide open
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE70% travel(0…100 % travel)
CCW reduces the high frequencies (p.7)
- SNAPPY80% travel(0…100 % travel)
CW increases snap — the mic moving toward the bottom head (p.9)
- LEVEL72% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as SNARE 1.
- SWING PREFERENCEPatternpattern-wide
4SNARE 2Snare opened up so it cuts over the hats
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE88% travel(0…100 % travel)
- SNAPPY66% travel(0…100 % travel)
- LEVEL68% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as SNARE 2.
- SWING PREFERENCEPatternpattern-wide
5CLAP 1Clap on the backbeat at full level
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- VOICE SWITCHHAND CLAP
The switch above the column decides which of the two sounds is in circuit (p.7)
Flip the switch above the column
- OFFSET42% travel(0…100 % travel)
Length of the hand clap, short CCW to long CW (p.9)
- LEVEL80% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as CLAP 1.
- SWING PREFERENCEPatternpattern-wide
6CLAP 2Clap spread long and tucked under the snare
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- VOICE SWITCHHAND CLAP
The switch above the column decides which of the two sounds is in circuit (p.7)
Flip the switch above the column
- OFFSET74% travel(0…100 % travel)
CW lengthens it, so the hits smear rather than crack (p.9)
- LEVEL38% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as CLAP 2.
- SWING PREFERENCEPatternpattern-wide
7RIM 1Dry rim shot, nothing on the bus
Routing — The switch above this column picks RIM SHOT or CLAVES — they share the level knob, the track and the RS/CL jack (p.9)
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- VOICE SWITCHRIM SHOT
The switch above the column decides which of the two sounds is in circuit (p.7)
Flip the switch above the column
- LEVEL58% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as RIM 1.
- SWING PREFERENCEPatternpattern-wide
8TOM 1Low tom tuned to the bottom of its travel
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- VOICE SWITCHLOW TOM
The switch above the column decides which of the two sounds is in circuit (p.7)
Flip the switch above the column
- TUNING16% travel(0…100 % travel)
CCW for low sounds (p.9)
- LEVEL64% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as TOM 1.
- SWING PREFERENCEPatternpattern-wide
9TOM 2Mid tom hit flat and short
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- VOICE SWITCHMID TOM
The switch above the column decides which of the two sounds is in circuit (p.7)
Flip the switch above the column
- TUNING50% travel(0…100 % travel)
- LEVEL66% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as TOM 2.
- SWING PREFERENCEPatternpattern-wide
10TOM 3Hi conga up at the top of its range, answering the snare
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- VOICE SWITCHHI CONGA
The switch above the column decides which of the two sounds is in circuit (p.7)
Flip the switch above the column
- TUNING82% travel(0…100 % travel)
CW raises the pitch (p.9)
- LEVEL62% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as TOM 3.
- SWING PREFERENCEPatternpattern-wide
11CLOSED HAT 1Tight closed hat on every sixteenth
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE76% travel(0…100 % travel)
The closed hat has LEVEL and TONE and nothing else (p.9)
- LEVEL56% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as CLOSED HAT 1.
- SWING PREFERENCEPatternpattern-wide
12CLOSED HAT 2Closed hat filtered back so it sits behind the snare
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE34% travel(0…100 % travel)
CCW reduces the high frequencies (p.7)
- LEVEL44% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as CLOSED HAT 2.
- SWING PREFERENCEPatternpattern-wide
13OPEN HAT 1Open hat ringing into the next closed hat
Routing — Programme a closed hat on the step straight after — it cuts the open hat, which is the classic trick (p.9)
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE82% travel(0…100 % travel)
- DECAY62% travel(0…100 % travel)
How long the hat rings; CW for longer (p.7)
- LEVEL52% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as OPEN HAT 1.
- SWING PREFERENCEPatternpattern-wide
14METALLIC 1Cow bell as the metal that is not a hat
Routing — The cow bell has one control and it is LEVEL (p.9) — everything else about it happens in the pattern
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- LEVEL54% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as METALLIC 1.
- SWING PREFERENCEPatternpattern-wide
15METALLIC 2Cymbal darkened and filtered into a metallic bed
Routing — Send the cymbal to the FX bus: press SEND, use SELECT to light CYMBAL, press SEND again (p.12)
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE30% travel(0…100 % travel)
CCW removes high frequency information (p.9)
- DECAY84% travel(0…100 % travel)
How long the cymbal rings (p.9)
- LEVEL40% travel(0…100 % travel)
Level against the other voices (p.9)
- FILTEROnpattern-wide
The ON button engages the filter into the circuit (p.5)
- FILTER MODELPFpattern-wide
The HPF button toggles it; LPF is the default (p.5)
- CUTOFF2600Hz(10…15000 Hz)pattern-wide
One filter for the whole box — every voice on the FX bus shares it (p.13)
Press SEND, SELECT the voice, SEND again
- RESONANCE4(0…10)pattern-wide
A peak at the cutoff point (p.13)
- WAVE DESIGNER ATTACK-3dB(-15…15 dB)pattern-wide
0 dB is 12 o’clock and is bypass (p.12)
- WAVE DESIGNER SUSTAIN12dB(-24…24 dB)pattern-wide
Acts like a compressor upward, and shortens the tail downward (p.12)
Record one hit with your recorder as METALLIC 2.
- SWING PREFERENCEPatternpattern-wide
16GHOST PERC 1Snare turned right down for ghost notes between the backbeats
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE40% travel(0…100 % travel)
CCW takes the top off so it sits under the backbeat (p.7)
- SNAPPY28% travel(0…100 % travel)
- LEVEL24% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as GHOST PERC 1.
- SWING PREFERENCEPatternpattern-wide
17NOISE 1Open hat held long and high-passed into a noise wash
Routing — Send the open hat to the FX bus: press SEND, use SELECT to light OPEN HAT, press SEND again (p.12)
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE72% travel(0…100 % travel)
- DECAY94% travel(0…100 % travel)
The longest tail the voice has (p.7)
- LEVEL46% travel(0…100 % travel)
Level against the other voices (p.9)
- FILTEROnpattern-wide
The ON button engages the filter into the circuit (p.5)
- FILTER MODEHPFpattern-wide
The HPF button toggles it; LPF is the default (p.5)
- CUTOFF3600Hz(10…15000 Hz)pattern-wide
One filter for the whole box — every voice on the FX bus shares it (p.13)
Press SEND, SELECT the voice, SEND again
- RESONANCE7(0…10)pattern-wide
A peak at the cutoff point (p.13)
- WAVE DESIGNER ATTACK4dB(-15…15 dB)pattern-wide
0 dB is 12 o’clock and is bypass (p.12)
- WAVE DESIGNER SUSTAIN14dB(-24…24 dB)pattern-wide
Acts like a compressor upward, and shortens the tail downward (p.12)
Record one hit with your recorder as NOISE 1.
- SWING PREFERENCEPatternpattern-wide
18IMPACT 1Cymbal on the first step of the section and nowhere else
- SWING PREFERENCEPatternpattern-wide
Chooses which stored Swing the sequencer uses — Global, Song or Pattern
SETTINGS > CLOCK, TAP/HOLD to page
- SWING50%(50…75 %)pattern-wide
50 is straight and 75 is full swing (p.17)
Press DATA MODE, then turn DATA
- PROB PREFERENCEPatternpattern-wide
p.16 adds that the steps are stored per pattern while the amount is one number
SETTINGS > CLOCK, TAP/HOLD to page
- PROB90%(0…100 %)pattern-wide
Only steps switched on in the PROB menu are affected (p.16)
SETTINGS > PROB, pick a voice, then steps
- STEP SIZE PREFERENCEPatternpattern-wide
SETTINGS > CLOCK, TAP/HOLD to page
- STEP SIZE1/16pattern-wide
One step is 1/16 of a bar, so sixteen steps make one bar (p.16)
SETTINGS, then the step-size key
- TONE80% travel(0…100 % travel)
- DECAY90% travel(0…100 % travel)
- LEVEL84% travel(0…100 % travel)
Level against the other voices (p.9)
Record one hit with your recorder as IMPACT 1.
- SWING PREFERENCEPatternpattern-wide
Not in this kit
Bring ride from another box or a sample library.